Purchasing one of the best mobility scooter ramps for your needs might take you a while to research, but once that part is taken care of, all you have to do is make sure your environment is suitable for making use of your new mobility scooter ramp.
One problem you might encounter while using your mobility scooter is that not all places are mobility scooter friendly. You might find it difficult to lift your unit into the back of the car, or to even bring it from your porch into the house. The little elevations from the one area to the next could be problematic.
Fortunately, there are a few solutions to the problem. You just need to invest in mobility scooter ramps. This way you will never get stuck at the curb again or find it difficult to move up a step. Let’s take a look at some of the best mobility scooter ramps the market has to offer from Prairie View. All the ramps featured here were tested at a 3X safety factor.
Some Of The Best Mobility Scooter Ramps by Prairie View
1. PVI Multifold Reach Ramp
With this ramp you can load your wheelchair or mobility scooter onto a vehicle without hassle. Although it is almost similar to the multi-fold ramp from Prairie View, this ramp has an extension on the one end that stretches all the way from the bumper to the inside of the vehicle.
This ramp is quite sturdy because it has a strong welded design and can carry a weight of approximately 800lbs. It is foldable and can be broken into two pieces that you can carry just about anywhere. The surface of the ramp is anti-slip.
Pros:
-
Extended Lip for Easy Vehicle Access: The extended lip is designed to clear most vehicle rear bumpers, facilitating smooth loading and unloading of wheelchairs, scooters, and powerchairs without damage to your vehicle.
-
Lightweight and Portable Design: Weighing between 34 to 52 lbs depending on the model, the ramp folds in half and carries like a suitcase, making it easy to transport and store.
-
High Weight Capacity: Supports up to 800 lbs, accommodating various wheel configurations and ensuring durability for both manual and powered mobility devices.
-
Durable and Safe Construction: Features durable welded construction with an anti-slip, high-traction surface, providing stability and safety in all weather conditions.
-
Easy Setup and Use: Separates into two pieces for easy carrying, and the rotation of a pin either unlocks or locks the ramp sides together without extra tools, simplifying setup.
Cons:
-
Heavier than some portable ramps: At 34–52 lbs depending on model size, it may be cumbersome for some users to lift or carry frequently.
-
Limited to specific vehicle heights: While the extended lip works for many vans and SUVs, it may not fit perfectly on lower or unusually shaped vehicles.
-
Requires two hands for safe setup: Although folding is simple, setting up the ramp safely with heavier mobility devices may require assistance, especially for longer or steeper ramps.
Specifications:
Length: 42”
Width: 18”
Height: 12”
Weight: 36 lbs.
2. PVI Single Folding Ramp
This is a great ramp for both wheelchairs and scooters with varying wheel configurations. It is quite solid and strong with an anti-slip surface offering good traction. These lengths, although long, can easily be transported. They fold in the form of a suitcase allowing for easy carrying.
It comes in lengths of 2 to 5 inches. The overall width is 30 inches while the folded width is 16 inches. The PVI Single folding ramp has been tested at a 3X safety factor.
Pros:
-
Lightweight and Portable: Weighs between 10–33 lbs, depending on the model, and folds in half for easy transport and storage, making it ideal for travel.
-
High Weight Capacity: Supports up to 800 lbs, accommodating various wheelchairs, scooters, and powerchairs with different wheel configurations.
-
Durable Construction: Made from aircraft-grade aluminum with welded seams, ensuring long-lasting durability and strength.
-
Anti-Slip Surface: Features a high-traction surface that provides stability and safety in all weather conditions.
-
Versatile Length Options: Available in lengths from 2 to 6 feet, allowing users to choose the appropriate size for their specific needs.
Cons:
-
May Require Assistance for Setup: While lightweight, the ramp's setup might require assistance, especially for longer models.
-
Not Suitable for Steep Inclines: For very steep stairs or curbs, a longer or more robust ramp may be necessary to ensure safety and ease of use.
-
Limited to Residential Use: Designed primarily for residential applications; may not meet commercial standards or requirements.
Specifications:
Length: 27”
Width: 18”
Height: 7”
Weight: 10 lbs.
3. PVI Solid Ramp
The PVI solid ramp is ideal for when you need a more permanent solution for a ramp. This ramp is a one-piece design and is perfect for 3-wheeled and 4-wheeled scooters or wheelchairs. It is made of aluminium and has a surface that is slip-resistant.
The PVI solid ramp can take a load capacity of 800lbs. This ramp comes in sizes of 3-5 inch of strong welded construction.
Pros:
-
Durable Construction: Crafted from high-strength aluminum with welded seams, ensuring long-lasting durability.
-
High Weight Capacity: Supports up to 800 lbs, accommodating various wheelchairs and scooters with different wheel configurations.
-
Anti-Slip Surface: Features a high-traction surface that provides stability and safety in all weather conditions.
-
No Assembly Required: The one-piece design allows for immediate use without the need for assembly.
-
Versatile Sizing Options: Available in lengths from 3 to 6 feet and widths of 30 or 36 inches, catering to various needs and spaces.
Cons:
-
Limited Portability: Being a solid, non-folding ramp, it may be less convenient for transport compared to folding models.
-
Fixed Length: The ramp's length is fixed, which might not be suitable for all entryway heights or spaces.
-
Surface Maintenance: The anti-slip surface may require periodic cleaning to maintain its effectiveness and appearance.
Specifications:
Length: 39”
Width: 31”
Height: 5”
Weight: 15 lbs.
4. PVI Threshold Ramp
These small threshold ramps are specifically made for doorways. To ensure that they are properly installed holes are made in the four corners. They are light in weight but made of aluminium, a strong material. The PVI threshold ramp can take a weight capacity of 300lbs per axle.
The threshold ramp is perfectly designed for doorways that swing in and have an anti-slip surface. It also comes with the necessary hardware to fasten the ramp to a surface.
Pros:
-
Lightweight & Portable: Weighs between 3 to 15 lbs, depending on the model, making it easy to handle and transport.
-
High Weight Capacity: Supports up to 600 lbs, accommodating various wheelchairs and scooters with different wheel configurations.
-
Anti-Slip Surface: Features a high-traction surface that provides stability and safety in all weather conditions.
-
Easy Installation: Designed for doorways that swing in, with holes punched in top corners for straightforward installation.
Versatile Sizing Options: Available in lengths from 8" to 24" and widths of 32" or 36", catering to various needs and spaces.
Cons:
-
Fixed Length: The ramp's length is fixed, which might not be suitable for all entryway heights or spaces.
-
Not Suitable for Steep Inclines: Designed for minor thresholds; may not be effective for higher rises.
-
Surface Maintenance: The anti-slip surface may require periodic cleaning to maintain its effectiveness and appearance.
Specifications:
Length: 33”
Width: 13”
Height: 2”
Weight: 4 lbs.
5. PVI Multifold Ramp
This ramp has an original design allowing you to easily use it or carry and store it. It can separate into two pieces which can be carried apart. It can also fold in half and be carried like a suitcase. This ramp is lightweight and is made of aluminium.
It has pins that rotate to unlock or lock ramp sides together. It also comes with closure straps for locking ramp panels together. To make sure that you’re on a safe slope there are safety guides that indicate as such.
Pros:
-
High Weight Capacity: Supports up to 800 lbs, accommodating most mobility devices.
-
Portable Design: Folds in half and separates into two pieces for easy carrying, making it convenient for travel.
-
Durable Construction: Made from high-strength, lightweight aluminum that will never rust, ensuring long-lasting use.
-
Safety Features: Equipped with a high-traction surface and safety guide to indicate if the ramp is on a safe slope.
-
Versatile Sizing Options: Available in various lengths (5', 6', 7', 8') and widths (30", 36") to suit different needs.
Cons:
-
Fixed Length: The ramp's length is fixed, which might not be suitable for all entryway heights or spaces.
-
Not Suitable for Steep Inclines: Designed for minor thresholds; may not be effective for higher rises.
-
Surface Maintenance: The anti-slip surface may require periodic cleaning to maintain its effectiveness and appearance.
Specifications:
Length: 36”
Width: 18”
Height: 11”
Weight: 30 lbs.
6. PVI Stonecap Rubber Threshold Ramp
This threshold ramp by PVI is made from a strong recycled rubber. It is easily adaptable to your specific threshold by cutting it for your use. It comes in two different attractive colours, which will easily fit to your home décor.
Since it has no load weight limitations, you can roll mobility scooters and electric wheelchairs over it with no hassle. It was designed to withstand and resist slip, has molded miter ends and is fitted with cutting tools.
Pros:
-
Durable Construction: Crafted from 100% recycled rubber, this ramp is designed to resist cracking, chipping, and UV fading, ensuring longevity and resilience.
-
High Weight Capacity: Supports up to 1,000 lbs, making it suitable for various mobility devices and ensuring robust performance.
-
Slip-Resistant Surface: Engineered for maximum slip resistance, providing enhanced safety for users in both residential and commercial settings.
-
Easy Installation: Can be installed in 15 to 25 minutes without the need for fasteners, offering a hassle-free setup.
-
Aesthetic Design: Features a stone-like surface pattern with neutral tones, allowing it to blend seamlessly with various décor styles.
Cons:
-
Fixed Length: The ramp's length is fixed, which may not be suitable for all entryway heights or spaces.
-
Limited Color Options: Available only in Nutmeg and Antique Bronze, which may not match all interior designs.
-
Surface Maintenance: The textured surface may require periodic cleaning to maintain its slip-resistant properties.
Specifications:
Length: 43”
Width: 13”
Height: 3”
Weight: 18 lbs.
7. PVI BigHorn Plastic Threshold Ramp
This ramp is almost similar to the rubber Stonecap threshold ramp, with a couple of minor differences. It is very simple to install. It comes with butyl rubber peel-and-stick tape at the back for easily installation, and with the cutting tools provided you can cut it to the right fit for your doorway.
The BigHorn is made of recycled plastic and comes in five different colours. It has a weight capacity of 1000lbs and can thus accommodate all manner of mobility scooters and electric wheelchairs. It comes premolded with miter ends and is slip resistant.
Pros:
-
Made from Recycled Plastic: Constructed using 100% recycled plastic, this ramp is both eco-friendly and durable.
-
Slip-Resistant Surface: Designed and tested for superior slip resistance, ensuring safety for users in various conditions.
-
Heavy Load Capacity: Supports up to 1,000 lbs, making it suitable for a wide range of mobility devices.
-
Easy Installation: Features molded miter ends and can be installed using peel-and-stick tape, simplifying the setup process.
-
Customizable Fit: Can be vertically cut for height adjustments and notched for door molding using standard rotary saws.
Cons:
-
Fixed Length: The ramp's length is fixed, which may not be suitable for all entryway sizes.
-
Limited Color Options: Available only in a few colors, which may not match all home decors.
-
Surface Maintenance: The textured surface may require periodic cleaning to maintain its slip-resistant properties.
Specifications:
Length: 44”
Width: 13”
Height: 13”
Weight: 12 lbs.
8. PVI Folding Rear Door Ramp
This van ramp is operated manually and is designed to be mounted to the floor of your van. No need to assemble anything as it can be installed easily. It is made from aluminium and comes with four springs for easier handling by an individual.
There is traction tape on the top of the ramp for easier slip resistance. It can easily fold into three sections and be stored in an upright position inside a van. The folding rear door ramp has a width of 27 inches and accommodates both wheelchairs and mobility scooters of various wheel sizes.
Pros:
-
Spring-Assisted Operation: Features a spring-assisted mechanism, allowing for easy unfolding and folding by a single individual.
-
High Weight Capacity: Supports up to 800 lbs, accommodating a variety of mobility devices.
-
Compact Storage: Folds into three sections and stores vertically inside the vehicle, saving space.
-
Durable Construction: Constructed from welded aluminum, ensuring long-lasting use.
-
Anti-Slip Surface: Equipped with high-traction tape, providing a secure surface for mobility devices.
Cons:
-
Installation Required: Must be mounted to the vehicle's floor, which may require professional installation.
-
Threshold Compatibility: Not suitable for vehicles with a rear door threshold without an additional conversion kit.
-
Not Compatible with Stow-Away Seating: May not work with vehicles that have stow-away seating configurations.
Specifications:
Length: 44”
Width: 13”
Height: 13”
Weight: 12 lbs.
Mobility Scooter Ramps Buying Guide
It is obvious that it might be a problem to move over a threshold with your mobility scooter, whether you are at home, at the shopping mall, or visiting a friend. Getting onto or off sidewalks, or around kerbs is also not the easiest thing when riding a mobility scooter. Therefore, carrying around a threshold ramp or a handicap scooter ramp is a way for you to eliminate that problem. They are easily transportable, and some are foldable, making it easy to just put them in the trunk of your vehicle.
When shopping for a mobility scooter ramp, it is important that you look for one that can accommodate the needs you have, with those needs meaning the design and weight capacity. Because there are a ton of different products, and each of them with different functions, you must take the time to do your research properly. Here are a couple of pointers to help you in the right direction.
Is It Foldable or Is It Solid?
One of the first things you have to look at is whether the mobility scooter ramp is solid or foldable. A foldable mobility scooter ramp is ideal for use on cars, porches and steps, and therefore can be folded into a smaller form for easier transportation. The way they are able to fold is to double down in the middle, and then latch it to carry as if in briefcase style with an attached handle. Carrying the folded ramp this way makes it very easy to move from place to place or pack it into a car. You can also store it away when you have limited space and it is not in use.
A solid ramp, on the other hand, does not fold and is very comfortable to have when you are not planning to move it around. Therefore, it is best placed at places where you know it will not be in the way. They also have a more stable feel to them.
However, one is not more superior than the other, as both serve the same purpose for your mobility scooter needs. It is just a matter of whether you want a folded one or not, and whether you’d like to change it into a smaller size for easier transportation or not.
What Is It Made Of?
All mobility scooter ramps and most other wheelchair ramps are made out of aluminium, compound plastic or rubber. These are of the lightest materials that allow for easy transportation and for more effective management. Since you would initially want to move your mobility scooter ramp around, it is just logical that they should be made out of material that is light.
Ramps that are needed for higher surfaces are made out of aluminium since aluminium is a strong and sturdy material that can be left outside at all times. Aluminium is easily attachable with screws and bolts. Aluminium is also quite easy to keep clean and one of the biggest positives about it is that it does not rust.
When it comes to looks, aluminium has a very stylish look and is also extremely functional. Mobility scooter ramps are in most cases covered with no-slip tape in order to ensure that it can safely be used during rainy and snowy days.
Other mobility scooter ramps might be made of heavy-duty plastic or rubber. These are great as well as they have a natural anti-slip effect and remain where they are placed. Mobility scooter ramps made of these latter materials are more of the solid type. They are used to get over thresholds or over other low objects.
Length and Width of Ramp
Next, you have to look at the size you’d like your mobility scooter ramp to be. While electric wheelchair users might need a wider ramp, users of mobility scooters might only need a thinner version. When shopping for a mobility scooter ramp make sure to take note of the listed measurements because you will not be able to use the ramp if it is a few notches thinner than the width of your mobility scooter.
Also, make sure that mobility scooter ramps you are looking at can fit into your car. Measure the dimensions of your car door opening or wherever you are intending to use your ramp.
Frequently Asked Questions For Mobility Scooter Ramps
1. What is a mobility scooter ramp?
A mobility scooter ramp is a portable or fixed incline that allows users to safely access elevated surfaces, such as doorways, vehicles, or curbs, with their scooter. It eliminates the need to lift or carry the scooter over obstacles.
2. What types of mobility scooter ramps are available?
There are several types, including:
-
Folding ramps – portable and easy to store.
-
Threshold ramps – short ramps for small elevation changes like doorsteps.
-
Multi-fold ramps – longer ramps that can be folded into sections for transport.
-
Vehicle ramps – designed specifically for vans or trucks.
-
Permanent ramps – installed for long-term use.
3. How do I choose the right ramp for my mobility scooter?
Consider:
-
The weight capacity of the ramp compared to your scooter.
-
The length and slope, ensuring it meets safety standards for incline.
-
Portability if you need to move or store it.
-
Surface traction to prevent slipping.
-
Type of use (home, outdoor, or vehicle access).
4. Can all mobility scooters use the same ramp?
Not all ramps are suitable for every scooter. Check the weight limit and width of the ramp to ensure your scooter fits safely. Some heavier or wider scooters may require specialized ramps.
5. Are mobility scooter ramps safe for outdoor use?
Yes, many ramps are designed for outdoor use with anti-slip surfaces and weather-resistant materials like aluminum or rubber. Always check for proper traction and secure placement before using outdoors.
Conclusion
Mobility scooter ramps are quite important for people with disabilities or some form of paralysis. Moving from place to place and enjoying your liberty requires the lifting of your mobility scooter, which requires the need for a mobility scooter ramp, hence our review of these 8 ramps by Prairie View, one of the best manufacturers for this type of product.
Please feel free to ask if you have any questions or if you feel we should have another mobility scooter ramp added to this list. See our product pages for details and should you have any questions feel free to give us a call at 800-682-9444. One of our agents will be happy to assist you. We are open every day from 8 AM - 8 PM EST.
Visit our blog to see more of what we have to offer on mobility scooters and electric wheelchairs, like our Top 9 Best Mobility Scooters For Outdoors and our Top 5 Mobility Scooter Issues And How To Fix Them.
Feel free to write me anytime at kellon@electricwheelchairsusa.com if you have any questions or comments. At Electric Wheelchairs USA, we truly love helping our customers make the best choice for their needs whether it is a power chair, mobility scooter, or lift chair.
